Waste Not, Want Not

When I saw the old, gas barbecue grill that my neighbor had thrown away, it gave me an idea. The metal frame of the grill would make a perfect roll-around tool stand for my miter saw.
All I had to do was remove the tank and grill, paint the metal frame, and then build a couple of table supports.
The miter saw is mounted to a 3/4" plywood base that’s bolted to the frame. Two open-ended boxes serve as the table supports. (Just be sure they’re flush with the surface of the miter saw table.) I even added a pull-out bin to hold short cut-off pieces.
You can get more interesting woodworking e-tips like this each week from the editors of Woodsmith Magazine just for the asking. Go here and sign up. It's free.

Crosscutting Bowed Boards

When it comes to crosscutting a board to length, I really appreciate my sliding compound miter saw. But cutting a bowed board always made me a bit nervous, at least until recently.
That's because a bowed board often rocks back and forth on the saw table, so it's hard to make a controlled cut. Worse yet, the workpiece can pinch against the sides of the blade as you make a cut, causing a dangerous kickback. Fortunately, there's a simple trick that will help reduce the chance of this happening.
Start by placing the board on the saw table so the bow faces up (Detail a). Then make a couple of shallow passes (about a 1/4" deep), overlapping them to form one wide kerf. Now make a full-depth cut all the way through the board (Detail b).

As the saw blade cuts completely through, the board will "settle" a bit so it sits flat on the saw table. But it won't pinch the sides of the blade. The wide kerf provides the extra clearance that's needed to prevent the blade from binding. The end result is a safe, controlled cut.

Get more tips like this delivered to your email box each week from the editors of Woodsmith magazine. Just sign-up. It's free.